2. Clamping process
1. Select and replace the corresponding moulds according to the specifications of the hose, turn on the power supply of the press to prepare for the start of the clamping work.
2. Pre-installation of jacketed pipe connectors is one of the important links in the buckling process, which directly affects the sealing of buckling pipe fittings.When the pressure control is in progress, the user inserts the sleeve into the hose buckle, the inner core of the connector is inserted into the hose to hold, and the sleeve is adjusted into the slot of the inner core.If the outer wall of the sleeve seal is pressed too far into the slot, the seal is not tight. If the sleeve is too far out, the sleeve will press directly onto the joint or the joint will be broken.
3. Put the adjusted tubing connector in the buckler and start the buckling key on the machine for buckling.If the automatic buckler is used, the machine stops automatically after the buckling work is completed, and the mould will open automatically. Remove the hose and proceed with the buckling of the next hose.If the press is operated manually, the operator needs to continuously observe the shrinkage of the sleeve of the clamped joint. Generally, the sleeve wraps the rubber tube tightly. It is advisable to bend the sleeve by hand where the rubber contacts with the rubber tube.
The above content is introduced and shared by the high pressure hose manufacturer. We hope it will be helpful to you. If you want to know more about the hydraulic industry, please pay attention to our website.
Contact person: manager Zhao
Tel: 13803954646 Fax: 86-395-6813366
Email: firstname.lastname@example.org website: www.luohemedline.com
Adress:No.701,Unit 1,Building 1,Joint Center of Taibaishan Road And Hanjiang Road,Xicheng District,Luohe,China.